807
X

1.
System Code
 
 

System | 807 is Vode at its most adaptable. An infinite combination of rails, mounting locations and optics, System 807 can be configured to meet the requirements of almost any interior application.

The system can be a stand-alone luminaire or a continuous line of light with unlimited length. Vode’s hardware allows for mounting to most surfaces - wall, ceiling, workstation, shelving, table, cabinetry, etc.

System lengths layout in 12” (305mm) increments. Standard rail lengths range from 24” (610mm) to 96” (2438mm). Some rail types are limited to 72” (1829mm). Metric and non-standard lengths and layouts are available. See Steps 4 and 5.

If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.

Read More  Read Less  
System | 807
 
Clear Selection
Note Add
Note Done

2.
Rail Type
 
 

Specify rail type. Click on a rail type for profile details and photometric data.

Standard rail lengths are:
24" (610mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
96" (2438mm)*

Specify metric and non-standard lengths in Step 5, Layout.

Single rails feature Vode's patented hub design with 370° rotation, angle gauge and lock-screw.

If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.

Read More  Read Less  
Nexa 3.25”
Nexa 5.25”
 
Clear Selection
Nexa 3.25”

Nexa3 3.25" x 0.55" (83mm x 14mm) profile, extruded aluminum, symmetric distribution luminaire.
Nexa 5.25”

Nexa5 5.25" x 0.58" (133mm x 15mm) profile, extruded aluminum, symmetric distribution luminaire.
Note Add
Note Done

3.
System Type
 
 
Surface
Recessed
 
Clear Selection
Note Add
Note Done

4.
Overall System Length
 
 

Specify an overall system length. If the desired fixture length is not listed, select Other (please specify) and enter the desired length in feet/inches or M/mm.

Read More  Read Less  
 
Clear Selection
Note Add
Note Done

Enter a non-standard length. Please specify unit of measure.

5.
Rail Length
 
 

Specify rail length. If you require a non-standard layout or rail length, select "Other rail length or layout (please specify)" and enter the desired layout and rail lengths.

Standard rail lengths are:
24" (610mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
96" (2438mm)*

If System Length is not divisible by Rail Length selected, Vode will complete the remainder with appropriate rail length(s). If a specific rail configuration is required, please select "Other rail length or layout (please specify)" and identify the specific layout desired.

Example:
34' (10363mm) system length with 72" (1829mm) rail length is 72", 72", 72", 72", 72", 48"

Non-standard layout or rail length:
Select "Other rail lengh or layout (please specify)" and enter length of each rail section in feet/inches or M/mm, separated by commas.

Non-standard  LED rail lengths are limited by LED board lengths. In some cases, non-standard lengths will mean that the lighted area of a rail is significantly shorter than the rail length. When non-standard layout/rail length  is chosen, Vode will contact specifier if any clarification is required.

Read More  Read Less  
24" (610mm)
30" (762mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
90" (2286mm)
96" (2438mm)
108" (2743mm)
120" (3048mm)
132" (3352mm)
144" (3658mm)
Other rail length or layout (please specify)

Enter desired layout separated by commas.

Enter values in feet/inches or millimeters.

Example of non-standard 20' system: 24",24",48",48",48",48"
 
Clear Selection
24" (610mm)
30" (762mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
90" (2286mm)
96" (2438mm)
108" (2743mm)
120" (3048mm)
132" (3352mm)
144" (3658mm)
Other rail length or layout (please specify)
Note Add
Note Done

6.
Mounting
 
 

Specify mounting type. Wall arm, ceiling arm, ceiling cord and table arm mountings are standard. Modified or custom mounting options are available upon request; please contact your local Vode agent with your specific requirements.

Examples:

Read More  Read Less  

Drywall & Masonary

Surface Mount Magnet

Suspended Ceiling

9/16" T-Bar Clip (Low)
9/16" T-Bar Clip (Medium)
15/16" T-Bar Clip (Low)
15/16" T-Bar Clip (Medium)
15/16" T-Bar Clip (Concealed)
Slotted T-Bar Clip
Dimensional T-Bar Clip
Armstrong ® DynaMax ™

Wood Ceilings

Grille Tegular Vertical Slats 9/16"
Grille Tegular Vertical Slats 15/16"
Grille Tegular Horizontal Slats
Grille 1-3/8" Slat
Grille 5-1/4" Slat Height
Grille 3-1/4" Slat Height

Strut Channel

Strut Channel Clip

Armstrong Ceilings

9/16" T-Bar Clip (Low)
9/16" T-Bar Clip (Medium)
15/16" T-Bar Clip (Low)
15/16" T-Bar Clip (Medium)
15/16" T-Bar Clip (Concealed)
Slotted T-Bar Clip
Dimensional T-Bar Clip
Grille Tegular Vertical Slats 9/16"
Grille Tegular Vertical Slats 15/16"
Grille Tegular Horizontal Slats
Grille 1-3/8" Slat
Grille 5-1/4" Slat Height
Grille 3-1/4" Slat Height

Suspended Ceiling (Integral Power)

Suspended Ceiling, Recessed

Armstrong Ceilings (Integral Power)

On Center, TechZone, Formations
 
Clear Selection
Surface Mount Magnet

Surface Mount Magnet (SM)
9/16" T-Bar Clip (Low)

Low Profile (T1)
9/16" T-Bar Clip (Medium)

Medium Profile (T5)
15/16" T-Bar Clip (Low)

Low Profile (T2)
15/16" T-Bar Clip (Medium)

Medium Profile (T3)
15/16" T-Bar Clip (Concealed)

Concealed Profile (T4)
Slotted T-Bar Clip

T-Bar Clip (T6)
Dimensional T-Bar Clip

T-Bar Clip (T7)
Armstrong ® DynaMax ™

T-Bar Clip (DM)
Grille Tegular Vertical Slats 9/16"

Grille Tegular Vertical Slats 9/16" (G1)
Grille Tegular Vertical Slats 15/16"

Grille Tegular Vertical Slats 15/16" (G2)
Grille Tegular Horizontal Slats

Grille Tegular Horizontal Slats (G3)
Grille 1-3/8" Slat

Grille 1-3/8" Slat (G4)
Grille 5-1/4" Slat Height

Grille 5-1/4" Slat Height (G5)
Grille 3-1/4" Slat Height

Grille 3-1/4" Slat Height (G6)
Strut Channel Clip

Strut Channel Clip (SC)
9/16" T-Bar Clip (Low)

Low Profile (T1A)
9/16" T-Bar Clip (Medium)

Medium Profile (T5A)
15/16" T-Bar Clip (Low)

Low Profile (T2A)
15/16" T-Bar Clip (Medium)

Medium Profile (T3A)
15/16" T-Bar Clip (Concealed)

Concealed (T4A)
Slotted T-Bar Clip

Slotted T-Bar Clip (T6A)
Dimensional T-Bar Clip

T-Bar Clip (T7A)
Grille Tegular Vertical Slats 9/16"

Grille Tegular Vertical Slats 9/16" (G1A)
Grille Tegular Vertical Slats 15/16"

Grille Tegular Vertical Slats 15/16" (G2A)
Grille Tegular Horizontal Slats

Grille Tegular Horizontal Slats (G3A)
Grille 1-3/8" Slat

Grille 1-3/8" Slat (G4A)
Grille 5-1/4" Slat Height

Grille 5-1/4" Slat Height (G5A)
Grille 3-1/4" Slat Height

Grille 3-1/4" Slat Height (G6A)
Suspended Ceiling, Recessed

Suspended Ceiling, Recessed (RSC)
On Center, TechZone, Formations

On Center, TechZone, Formations, Direct Cove, AcoustiBuilt, Drywall (RAC)
Note Add
Note Done

7.
Arm/Cord Length
 
 

Specify arm or cord length. If the desired arm or cord length is not available, select “Other (please specify)" and enter the desired length in inches or mm.

Standard cord lengths are 48" (1219mm), 96" (2438mm) and have an adjustment range of -44" (1118mm) to +7" (177mm).

Standard arm lengths range from 1.25" (32mm) minimum to 24" (610mm) maximum. Non-standard lengths are available.

Wall mounting for single rail systems with arm lengths ≥18" (457mm); and double rail systems with arm lengths ≥6" (152mm) requires cable tie-back (included).

Arm dimensions:
Single arms, 0.5" x 1” (13mm x 25mm), are used at the end of each system.  Double arms, 1” x 1” (25mm x 25mm), are used for rail to rail connection.

Single arms1/2" (13mm) x 1" (26mm) used at end of each system

cable tie-back

cable tie-back allows precision leveling of lighting system
Read More  Read Less  

Arm Lengths

None
105-X-X-X-WA|107-X-X-X-WA

Wall mounted (WA) systems include cable tie-back for arms >18"
 
Clear Selection
Note Add
Note Done

8.
Power Location
 
 

Specify integral or remote power location and desired hardware type.

Vode power locations fall into two categories: integral and remote.

Integral power:
Integral power means the power supply is located in a surface-mounted driver housing or recessed Vode junction box. Arms or cords connect rails to the driver housing.

Remote power:
Remote power means the power supply is located in an electrical enclosure mounted away from the rail and arm/cord assembly. Power supply enclosures and connections must be accessible after installation. One electrical enclosure is included for each power supply provided by Vode.

It is very important that power supplies are located within the maximum distance allowed. See Step 9, Power Supply, and consult the Vode Power Guide for more details.

Arm anchor is recommended for most table mounted applications. Access to electrical connections behind mounting surface after installation is required. Arm anchor is not recommended for wall or ceiling applications unless mounting structure is similar to a table surface.

Read More  Read Less  

Remote Power

10' Harness
25' Harness
50' Harness
75' Harness
100' Harness

Integral Power

Integral Power
 
Clear Selection
Remote Power, 10’ (3.04m) Wire Harness
Remote Power, 25' (7.62m) Wire Harness
Remote Power, 50' (15.24m) Wire Harness
Remote Power, 75' (22.86m) Wire Harness
Remote Power, 100' (30.48m) Wire Harness
Integral Power
Note Add
Note Done

9.
Power Supply
 
 

Vode selects power supplies or drivers based on the specific requirements of each LED project.

Vode supplies one driver per rail section and one 25’ (7.62m) wire harness for the power connection. Vode supplies two drivers and two wire harnesses per rail section for DoubleBox and DoubleRace rails.

Vode configures LED power to meet the requirements of your specification. Vode supplies drivers to match the designed load of your system. For most applications, drivers can be located up to 100’ (30.5m) from the rail using Vode wire harnesses.

Driver dimming curve is factory preset to linear. Logarithmic is available upon request.

It is very important that drivers are located within the maximum distance allowed. See Vode Power Guide for maximum remote distance information.

If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.

Read More  Read Less  

Flexible 1 to 1 Power

0-10v, 1.0% Dimming
0-10v, 0.1% Dimming
DALI, 0.1% Dimming
DMX,100-0% Dimming
Lutron Hi-lume 1% EcoSystem (LDE1)
ELV 1% 2-wire (Forward and Reverse Phase)

Optimized Power

0-10v, 1% Dimming, Optimized Power
0-10v, 0.1% Dimming, Optimized Power
DALI, 0.1% Dimming, Optimized Power
DMX, 100-0% Dimming, Optimized Power

Flexible 1 to 1 Power with VodeNODE

0-10v, 1.0% Dimming
0-10v, 0.1% Dimming
DALI, 0.1% Dimming
DMX,100-0% Dimming
Lutron Hi-lume 1% EcoSystem (LDE1)

Optimized Power with VodeNODE

0-10v, 1.0% Dimming
0-10v, 0.1% Dimming
DALI, 0.1% Dimming
DMX,100-0% Dimming

Power

Other (please specify)

Enter brand and model number for power supply
 
Clear Selection
0-10v, 1.0% Dimming

Dimming: 100% to 1%, 0-10V (isolated). (AE)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
0-10v, 0.1% Dimming

Dimming: 100% to 0.1%, 0-10V (isolated). (AT)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DALI, 0.1% Dimming

Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (AD)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DMX,100-0% Dimming

Dimming: 100% to 0% (AX)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Lutron Hi-lume 1% EcoSystem (LDE1)

Dimming: 100% to 1.0% (AH)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m).
ELV 1% 2-wire (Forward and Reverse Phase)

Dimming: 100% to 1.0% (AH2)
Input Voltage: 120, 50/60 Hz.
Remote Distance: Up to 100' (30m).
0-10v, 1% Dimming, Optimized Power

Dimming: 100% to 1%, 0-10V (isolated). (AEO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
0-10v, 0.1% Dimming, Optimized Power

Dimming: 100% to 0.1%, 0-10V (isolated). (ATO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DALI, 0.1% Dimming, Optimized Power

Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DMX, 100-0% Dimming, Optimized Power

Dimming: 100% to 0% (AXO)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
0-10v, 1.0% Dimming

Dimming: 100% to 1%, 0-10V (isolated). (AEN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
0-10v, 0.1% Dimming

Dimming: 100% to 0.1%, 0-10V (isolated). (ATN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DALI, 0.1% Dimming

Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DMX,100-0% Dimming

Dimming: 100% to 0% (AXN)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Lutron Hi-lume 1% EcoSystem (LDE1)

Dimming: 100% to 1.0% (AHN)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m).
0-10v, 1.0% Dimming

Dimming: 100% to 1%, 0-10V (isolated). (AEON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
0-10v, 0.1% Dimming

Dimming: 100% to 0.1%, 0-10V (isolated). (ATON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DALI, 0.1% Dimming

Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
DMX,100-0% Dimming

Dimming: 100% to 0% (AXON)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Other (please specify)
Note Add
Note Done

Enter brand and model number for power supply

10.
Voltage
 
 

Specify a voltage.

All Vode drivers are universal voltage 120-277v, expect Lutron Hi-Lume 1% 2 wire LTEA2W, which is 120v. Please see Vode Power Guide or contact your local Vode agent with your specific requirements.

Read More  Read Less  
120V
120V - 277V
Other (please specify)
 
Clear Selection
Note Add
Note Done

11.
Emergency Power
 
 

Contact Vode or your local Vode agent for emergency power options.
No Emergency Driver
Other (please specify)
 
Clear Selection
Note Add
Note Done

12.
LED Type
 
 

Zipper Board LEDs are arranged in a dense row of 72 LEDs per foot (305mm).
Zipper board
 
Clear Selection
Zipper board

Zipper Board LEDs are arranged in a dense row of 72 LEDs per foot (305mm), resembling a zipper. LED's are lower power and compatible with a variety of optics for each rail type.
Note Add
Note Done

13.
Lumen Output
 
 

Specify lumen output. See IES Files for lumen packages based on lumen output and rail type

Zipper Board
Low Output (LO) is approximately 3 watts per foot (310mm).
BoxRail:  117 lm/ft. to 348 lm/ft. @ 3500K, depending on optics.
RaceRail: 359 lm/ft. to 425 lm/ft. @ 3500K, depending on optics. 
WingRail: 275 lm/ft. to 386 lm/ft. @ 3500K, depending on optics.

Standard Output (SO) is approximately 6 watts per foot (310mm).
BoxRail:  234 lm/ft. to 696 lm/ft. @ 3500K, depending on optics.
RaceRail: 719 lm/ft. to 849 lm/ft. @ 3500K, depending on optics. 
WingRail: 550 lm/ft. to 771 lm/ft. @ 3500K, depending on optics.

High Output (HO) is approximately 12 watts per foot (310mm).
BoxRail:  430 lm/ft. to 1280 lm/ft. @ 3500K, depending on optics.
RaceRail: 1323 lm/ft. to 1563 lm/ft. @ 3500K, depending on optics. 
WingRail: 1013 lm/ft. to 1419 lm/ft. @ 3500K, depending on optics.

Button Board
Standard Output (SO) is approximately 7 watts per foot (310mm).
BoxRail:  460 lm/ft. to 1534 lm/ft. @ 3500K, depending on optics.
WingRail: 456 lm/ft. to 516 lm/ft. @ 3500K, depending on optics.

High Output (HO) is approximately 11 watts per foot (310mm).*
BoxRail:  701 lm/ft. to 810 lm/ft. @ 3500K, depending on optics.
WingRail: 690 lm/ft. to 786 lm/ft. @ 3500K, depending on optics.

See IES files for complete details.

*Power and dimming options limited. See Vode Driver Guide for complete details.

Read More  Read Less  
Very Low Output
Low Output
Standard Output
High Output
Other (please specify)
 
Clear Selection
Note Add
Note Done

14.
Color Temperature
 
 

Vode offers four standard color temperatures: 2700K, 3000K, 3500K and 4000K at 80+ CRI and 90+ CRI. Tunable white (2200K-5000K) and other color temperatures available upon request. Please contact your local Vode agent with your specific requirements.
2700K, 80+ CRI
2700K, 90+ CRI
3000K, 80+ CRI
3000K, 90+ CRI
3500K, 80+ CRI
3500K, 90+ CRI
4000K, 80+ CRI
4000K, 90+ CRI
Dim to Warm 2200K - 3000K
Tunable White 2200K - 5000K
Other (please specify)

Please specify color temperature
 
Clear Selection
Note Add
Note Done

Please specify color temperature

15.
Optics
 
 

Specify optic.

Vode offers a large selection of optical control in the form of lenses, diffusers, and special optics for a wide variety of applications. If desired optic is not offered, select "Other (please specify)" and enter your specific requirements.

Read More  Read Less  

Critical Edge

Critical Edge

Honeycomb

Honeycomb Louver
 
Clear Selection
Critical Edge

(CE)
Honeycomb Louver

(HL)
Note Add
Note Done

Specify desired optic, please be as specific as possible.

16.
Sensors
 
 

Sensors are available. Contact Vode or your Vode agent with your specific requirements.
None
Sensor (specify requirements)

Specify brand and model number of sensor desired.
 
Clear Selection
Note Add
Note Done

17.
Finish
 
 

Specify finish. Non-standard finishes available; select "Other (please specify)" and enter your specific requirements.
Clear Anodized
Black Anodized
 
Clear Selection
Clear Anodized
Black Anodized
Note Add
Note Done

18.
Options
 
 

If options are available with your selected rail, select all desired options. Select "None" if no options are required. If you don't see your ideal solution, select "Other (please specify)" and enter your specific requirements.

9’ 18/3 cord and plug allows the luminaire to be plugged into any standard grounded outlet.

On/off switch is only available with Table Arm. One on/off switch is provided per LED Driver.

Read More  Read Less  
None
Chicago Plenum
9' 18/3 cord and plug
Other (please specify)
 
Clear Selection
Note Add
Note Done

Line art is respresentative only. Dimensions not necessarily to scale.