107
1.
System Code
System | 107 is Vode at its most adaptable. An infinite combination of rails, mounting locations and optics, System 107 can be configured to meet the requirements of almost any interior application.
The system can be a stand-alone luminaire or a continuous line of light with unlimited length. Vode’s hardware allows for mounting to most surfaces - wall, ceiling, workstation, shelving, table, cabinetry, etc.
System lengths layout in 12” (305mm) increments. Standard rail lengths range from 24” (610mm) to 96” (2438mm). Some rail types are limited to 72” (1829mm). Metric and non-standard lengths and layouts are available. See Steps 4 and 5.
If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.
2.
Rail Type
Specify rail type. Click on a rail type for profile details and photometric data.
Standard rail lengths are:
24" (610mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
96" (2438mm)*
Specify metric and non-standard lengths in Step 5, Layout.
Single rails feature Vode's patented hub design with 370° rotation, angle gauge and lock-screw.
If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.
*DoubleBox and DoubleRace rails only
|
|
|
1.14" x 1.14" (29mm x 29mm) profile, extruded aluminum, symmetric distribution luminaire.
1.14" x 2.48" (29mm x 63mm) profile, extruded aluminum, direct/indirect distribution luminaire.
1.1” x 2.48” (28mm x 63mm) profile, extruded aluminum, direct/indirect distribution luminaire.
Ø1.1" (28mm) profile, extruded aluminum, symmetric distribution luminaire.
Asymmetric profile, 1.14” (29mm) x 2.12” (54mm).
3.
Single/Double Rail
4.
Overall System Length
Specify an overall system length. If the desired fixture length is not listed, select Other (please specify) and enter the desired length in feet/inches or M/mm.
5.
Rail Length
Specify rail length. If you require a non-standard layout or rail length, select "Other rail length or layout (please specify)" and enter the desired layout and rail lengths.
Standard rail lengths are:
24" (610mm)
36" (914mm)
48" (1219mm)
60" (1524mm)
72" (1829mm)
96" (2438mm)*
If System Length is not divisible by Rail Length selected, Vode will complete the remainder with appropriate rail length(s). If a specific rail configuration is required, please select "Other rail length or layout (please specify)" and identify the specific layout desired.
Example:
34' (10363mm) system length with 72" (1829mm) rail length is 72", 72", 72", 72", 72", 48"
Non-standard layout or rail length:
Select "Other rail lengh or layout (please specify)" and enter length of each rail section in feet/inches or M/mm, separated by commas.
Non-standard LED rail lengths are limited by LED board lengths. In some cases, non-standard lengths will mean that the lighted area of a rail is significantly shorter than the rail length. When non-standard layout/rail length is chosen, Vode will contact specifier if any clarification is required.
6.
Mounting
Specify mounting type. Wall arm, ceiling arm, ceiling cord and table arm mountings are standard. Modified or custom mounting options are available upon request; please contact your local Vode agent with your specific requirements.
Examples:
 wall arm |
 ceiling arm |
 ceiling cable |
 table arm |
RaceRail shown
(WA)
(TA)
(CA)
(CC)
7.
Arm/Cord Length
Specify arm or cord length. If the desired arm or cord length is not available, select “Other (please specify)" and enter the desired length in inches or mm.
Standard cord lengths are 48" (1219mm), 96" (2438mm) and have an adjustment range of -44" (1118mm) to +7" (177mm).
Standard arm lengths range from 1.25" (32mm) minimum to 24" (610mm) maximum. Non-standard lengths are available.
Wall mounting for single rail systems with arm lengths ≥18" (457mm); and double rail systems with arm lengths ≥6" (152mm) requires cable tie-back (included).
Arm dimensions:
Single arms, 0.5" x 1” (13mm x 25mm), are used at the end of each system. Double arms, 1” x 1” (25mm x 25mm), are used for rail to rail connection.
 Single arms1/2" (13mm) x 1" (26mm) used at end of each system |
 cable tie-back |
 cable tie-back allows precision leveling of lighting system |
Arm Lengths
|
1.25" arm (32mm)
|
3" arm (76mm)
|
|
6" arm (152mm)
|
12" arm (305mm)
|
|
18" arm (457mm)
|
24" arm (610mm)
|
|
Other (please specify)
|
18" arm (457mm)
|
|
Other (please specify)
|
1.25" arm (32mm)
|
|
3" arm (76mm)
|
6" arm (152mm)
|
|
12" arm (305mm)
|
18" arm (457mm)
|
|
24" arm (610mm)
|
Other (please specify)
|
Cord Lengths
|
48" cord
|
96" cord
|
|
Other (please specify)
|
8.
Power Location
Specify integral or remote power location and desired hardware type.
Vode power locations fall into two categories: integral and remote.
Integral power:
Integral power means the power supply is located in a surface-mounted driver housing or recessed Vode junction box. Arms or cords connect rails to the driver housing.
Remote power:
Remote power means the power supply is located in an electrical enclosure mounted away from the rail and arm/cord assembly. Power supply enclosures and connections must be accessible after installation. One electrical enclosure is included for each power supply provided by Vode.
It is very important that power supplies are located within the maximum distance allowed. See Step 9, Power Supply, and consult the Vode Power Guide for more details.
Arm anchor is recommended for most table mounted applications. Access to electrical connections behind mounting surface after installation is required. Arm anchor is not recommended for wall or ceiling applications unless mounting structure is similar to a table surface.
Integral Power
|
Integral Power
|
Zero Canopy, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Zero Block, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Small Round Canopy, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Small Square Canopy, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Large Round Canopy, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Large Square Canopy, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
Arm Anchor, Remote Power
|
10' Harness
|
25' Harness
|
50' Harness
|
75' Harness
|
|
100' Harness
|
One 4.5” (114mm) square junction box cover plate included with each run. Designed for wall or ceiling. Blocking recommended at all arm or cord locations. Line voltage power may feed 1) directly through back-plate, 2) from standard junction box (supplied by others).
8” (203mm) x 8” (203mm) plate mounts to building framing. Designed to be taped and plastered-in flush with 5/8” (16mm) thick drywall - for cabinet or casework use Zero Block. Designed for wall or ceiling. Available for arm mount only. No visible mounting hardware after installation. Must be installed prior to drywall or plaster. No adjustment possible after installation.
8” (203mm) x 8” (203mm) plate mounts to building framing. Designed to be taped and plastered-in flush with 5/8” (16mm) thick drywall - for cabinet or casework use Zero Block. Designed for wall or ceiling. Available for arm mount only. No visible mounting hardware after installation. Must be installed prior to drywall or plaster. No adjustment possible after installation.
8” (203mm) x 8” (203mm) plate mounts to building framing. Designed to be taped and plastered-in flush with 5/8” (16mm) thick drywall - for cabinet or casework use Zero Block. Designed for wall or ceiling. Available for arm mount only. No visible mounting hardware after installation. Must be installed prior to drywall or plaster. No adjustment possible after installation.
8” (203mm) x 8” (203mm) plate mounts to building framing. Designed to be taped and plastered-in flush with 5/8” (16mm) thick drywall - for cabinet or casework use Zero Block. Designed for wall or ceiling. Available for arm mount only. No visible mounting hardware after installation. Must be installed prior to drywall or plaster. No adjustment possible after installation.
8” (203mm) x 8” (203mm) plate mounts to building framing. Designed to be taped and plastered-in flush with 5/8” (16mm) thick drywall - for cabinet or casework use Zero Block. Designed for wall or ceiling. Available for arm mount only. No visible mounting hardware after installation. Must be installed prior to drywall or plaster. No adjustment possible after installation.
Mounts to 0.5” (13mm) hole drilled through material up to 1.5” (38mm) thick. Designed for cabinet and casework - for drywall use Zero Canopy. Available for arm mount only. No visible mounting hardware after installation. Hardware behind mounting surface must be accessible after installation.
Mounts to 0.5” (13mm) hole drilled through material up to 1.5” (38mm) thick. Designed for cabinet and casework - for drywall use Zero Canopy. Available for arm mount only. No visible mounting hardware after installation. Hardware behind mounting surface must be accessible after installation.
Mounts to 0.5” (13mm) hole drilled through material up to 1.5” (38mm) thick. Designed for cabinet and casework - for drywall use Zero Canopy. Available for arm mount only. No visible mounting hardware after installation. Hardware behind mounting surface must be accessible after installation.
Mounts to 0.5” (13mm) hole drilled through material up to 1.5” (38mm) thick. Designed for cabinet and casework - for drywall use Zero Canopy. Available for arm mount only. No visible mounting hardware after installation. Hardware behind mounting surface must be accessible after installation.
Mounts to 0.5” (13mm) hole drilled through material up to 1.5” (38mm) thick. Designed for cabinet and casework - for drywall use Zero Canopy. Available for arm mount only. No visible mounting hardware after installation. Hardware behind mounting surface must be accessible after installation.
Ø2.5” (64mm) round cover plate. Designed for wall or ceiling. Vode mini junction box included. Must be installed prior to drywall or plaster.
Ø2.5” (64mm) round cover plate. Designed for wall or ceiling. Vode mini junction box included. Must be installed prior to drywall or plaster.
Ø2.5” (64mm) round cover plate. Designed for wall or ceiling. Vode mini junction box included. Must be installed prior to drywall or plaster.
Ø2.5” (64mm) round cover plate. Designed for wall or ceiling. Vode mini junction box included. Must be installed prior to drywall or plaster.
Ø2.5” (64mm) round cover plate. Designed for wall or ceiling. Vode mini junction box included. Must be installed prior to drywall or plaster.
2.5” (64mm) square cover plate. Designed for wall or ceiling. Available for arm mount only. Vode mini junction box included. Must be installed prior to drywall or plaster.
2.5” (64mm) square cover plate. Designed for wall or ceiling. Available for arm mount only. Vode mini junction box included. Must be installed prior to drywall or plaster.
2.5” (64mm) square cover plate. Designed for wall or ceiling. Available for arm mount only. Vode mini junction box included. Must be installed prior to drywall or plaster.
2.5” (64mm) square cover plate. Designed for wall or ceiling. Available for arm mount only. Vode mini junction box included. Must be installed prior to drywall or plaster.
2.5” (64mm) square cover plate. Designed for wall or ceiling. Available for arm mount only. Vode mini junction box included. Must be installed prior to drywall or plaster.
Ø4.5” (114mm) round cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
Ø4.5” (114mm) round cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
Ø4.5” (114mm) round cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
Ø4.5” (114mm) round cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
Ø4.5” (114mm) round cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
4.5” (114mm) square cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
4.5” (114mm) square cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
4.5” (114mm) square cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
4.5” (114mm) square cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
4.5” (114mm) square cover plate. Designed for wall or ceiling. Mounts to contractor supplied junction box. Universal mounting plate supplied.
Ø2” (51mm) round finish plate. Designed for table mount. Available for arm mount only. 48” (1219mm) maximum arm length. Mounts through 1-11/16” (43mm) hole in material up to 2.5" (64mm) thick. Hardware behind mounting surface must be accessible after installation.
Ø2” (51mm) round finish plate. Designed for table mount. Available for arm mount only. 48” (1219mm) maximum arm length. Mounts through 1-11/16” (43mm) hole in material up to 2.5" (64mm) thick. Hardware behind mounting surface must be accessible after installation.
Ø2” (51mm) round finish plate. Designed for table mount. Available for arm mount only. 48” (1219mm) maximum arm length. Mounts through 1-11/16” (43mm) hole in material up to 2.5" (64mm) thick. Hardware behind mounting surface must be accessible after installation.
Ø2” (51mm) round finish plate. Designed for table mount. Available for arm mount only. 48” (1219mm) maximum arm length. Mounts through 1-11/16” (43mm) hole in material up to 2.5" (64mm) thick. Hardware behind mounting surface must be accessible after installation.
Ø2” (51mm) round finish plate. Designed for table mount. Available for arm mount only. 48” (1219mm) maximum arm length. Mounts through 1-11/16” (43mm) hole in material up to 2.5" (64mm) thick. Hardware behind mounting surface must be accessible after installation.
9.
Power Supply
Vode selects power supplies or drivers based on the specific requirements of each LED project.
Vode supplies one driver per rail section and one 25’ (7.62m) wire harness for the power connection. Vode supplies two drivers and two wire harnesses per rail section for DoubleBox and DoubleRace rails.
Vode configures LED power to meet the requirements of your specification. Vode supplies drivers to match the designed load of your system. For most applications, drivers can be located up to 100’ (30.5m) from the rail using Vode wire harnesses.
Driver dimming curve is factory preset to linear. Logarithmic is available upon request.
It is very important that drivers are located within the maximum distance allowed. See Vode Power Guide for maximum remote distance information.
If you don’t see your ideal solution, please contact your local Vode agent with your specific requirements.
Flexible 1 to 1 Power
|
0-10v, 1% Dimming
|
|
0-10v, 0.1% Dimming
|
|
DALI, 0.1% Dimming
|
|
DMX, 100-0% Dimming
|
|
Lutron Hi-lume 1% EcoSystem, Soft On / Fade to Black Technology, LDE1
|
|
ELV 1% 2-wire (Forward and Reverse Phase)
|
Optimized Power
|
0-10v, 1% Dimming, Optimized Power
|
|
0-10v, 0.1% Dimming, Optimized Power
|
|
DALI, 0.1% Dimming, Optimized Power
|
|
DMX, 100-0% Dimming, Optimized Power
|
Flexible 1 to 1 Power with VodeNODE
|
0-10v, 1.0% Dimming
|
|
0-10v, 0.1% Dimming
|
|
DALI, 0.1% Dimming
|
|
DMX, 100-0% Dimming
|
|
Lutron Hi-lume 1% EcoSystem (LDE1)
|
Optimized Power with VodeNODE
|
0-10v, 1.0% Dimming
|
|
0-10v, 0.1% Dimming
|
|
DALI, 0.1% Dimming
|
|
DMX, 100-0% Dimming
|
Power
|
Other (please specify)
|
Dimming: 100% to 1%, 0-10V (isolated). (AE)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 1%, 0-10V (isolated). (AEO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, 0-10V (isolated). (AT)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, 0-10V (isolated). (ATO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (AD)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADO)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0% (AX)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Dimming: 100% to 0% (AXO)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Dimming: 100% to 1.0% (AH)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m).
Dimming: 100% to 1.0% (AH2)
Input Voltage: 120, 50/60 Hz.
Remote Distance: Up to 100' (30m).
Dimming: 100% to 1%, 0-10V (isolated). (AEN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, 0-10V (isolated). (ATN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADN)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0% (AXN)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
Dimming: 100% to 1.0% (AHN)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m).
Dimming: 100% to 1%, 0-10V (isolated). (AEON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, 0-10V (isolated). (ATON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0.1%, Digital Addressable Lighting Interface (DALI). (ADON)
Input Voltage: 120-277V, 50/60 Hz.
Remote Distance: Up to 100' (30m) from LED source.
Dimming: 100% to 0% (AXON)
Input Voltage: Universal 120-277V, 50/60 Hz.
Remote Distance: Up to 100’ (30m) from LED source.
10.
Voltage
Specify a voltage.
All Vode drivers are universal voltage 120-277v, expect Lutron Hi-Lume 1% 2 wire LTEA2W, which is 120v. Please see Vode Power Guide or contact your local Vode agent with your specific requirements.
11.
Emergency Power
Contact Vode or your local Vode agent for emergency power options.
12.
LED Type
Zipper Board LEDs are arranged in a dense row of 72 LEDs per foot (305mm). Button boards have 6 LED's per foot (305mm) and are fitted with beam shaping optics.
Zipper Board LEDs are arranged in a dense row of 72 LEDs per foot (305mm), resembling a zipper. LED's are lower power and compatible with a variety of optics for each rail type.
Button boards have 6 LED's per foot (305mm). LEDs are higher output and come with 19° x 48° Oval or 36° Medium beam shaping optics.
13.
Lumen Output
Specify lumen output. See IES Files for lumen packages based on lumen output and rail type
Zipper Board
Low Output (LO) is approximately 3 watts per foot (310mm).
BoxRail: 117 lm/ft. to 348 lm/ft. @ 3500K, depending on optics.
RaceRail: 359 lm/ft. to 425 lm/ft. @ 3500K, depending on optics.
WingRail: 275 lm/ft. to 386 lm/ft. @ 3500K, depending on optics.
Standard Output (SO) is approximately 6 watts per foot (310mm).
BoxRail: 234 lm/ft. to 696 lm/ft. @ 3500K, depending on optics.
RaceRail: 719 lm/ft. to 849 lm/ft. @ 3500K, depending on optics.
WingRail: 550 lm/ft. to 771 lm/ft. @ 3500K, depending on optics.
High Output (HO) is approximately 12 watts per foot (310mm).
BoxRail: 430 lm/ft. to 1280 lm/ft. @ 3500K, depending on optics.
RaceRail: 1323 lm/ft. to 1563 lm/ft. @ 3500K, depending on optics.
WingRail: 1013 lm/ft. to 1419 lm/ft. @ 3500K, depending on optics.
Button Board
Standard Output (SO) is approximately 7 watts per foot (310mm).
BoxRail: 460 lm/ft. to 1534 lm/ft. @ 3500K, depending on optics.
WingRail: 456 lm/ft. to 516 lm/ft. @ 3500K, depending on optics.
High Output (HO) is approximately 11 watts per foot (310mm).*
BoxRail: 701 lm/ft. to 810 lm/ft. @ 3500K, depending on optics.
WingRail: 690 lm/ft. to 786 lm/ft. @ 3500K, depending on optics.
See IES files for complete details.
*Power and dimming options limited. See Vode Driver Guide for complete details.
14.
Color Temperature
Vode offers four standard color temperatures: 2700K, 3000K, 3500K and 4000K at 90+ CRI. Tunable white (2200K-5000K) and other color temperatures available upon request. Please contact your local Vode agent with your specific requirements.
|
2700K, 90+ CRI
|
3000K, 90+ CRI
|
|
3500K, 90+ CRI
|
4000K, 90+ CRI
|
|
Other (please specify)
|
15.
Optics
Zipper board
|
White Baffle with EdgeSoft
|
Black Baffle with EdgeSoft
|
|
Clear with EdgeSoft
|
Diffuse
|
|
Other (please specify)
|
Diffuse
|
|
White Baffle
|
Black Baffle
|
|
Wide Batwing
|
40° Symmetric
|
|
60° Symmetric
|
85° Asymmetric
|
|
120° FlyWing
|
Other (please specify)
|
|
Diffuse, Round
|
120° Batwing, flat
|
|
120° FlyWing, Flat
|
Other (please specify)
|
|
Round Diffuse up, Round Diffuse down
|
120° Batwing, flat, up | 120° Flywing, flat, down
|
|
120° Batwing, flat, up | Diffuse, round, down
|
Other (please specify)
|
|
Wide Batwing, up | Diffuse, down
|
Wide Batwing up | White Baffle down
|
|
Wide Batwing up | Black Baffle down
|
Wide Batwing up | 40° Symmetric down
|
|
Wide Batwing up | 60° Symmetric down
|
Wide Batwing up | 85° Asymmetric down
|
|
Wide Batwing up | 120° Flywing down
|
Other (please specify)
|
Button board
|
19° x 48° Oval
|
36° Medium
|
|
Other (please specify)
|
19°x 48° Oval
|
|
36° Medium
|
Other (please specify)
|
(WB)
(BB)
(C1)
(D1)
(19)
(36)
(1)
(WB)
(BB)
(G1)
(S1)
(S2)
(A1)
(G2)
(19)
(36)
(2)
(G1)
(G2)
(22)
(G1G2)
(G12)
(G12)
(G1WB)
(G1BB)
(G1S1)
(G1S2)
(G1A1)
(G1G2)
16.
Sensors
Sensors are available. Contact Vode or your Vode agent with your specific requirements.
Options
|
None
|
|
Other (please specify)
|
Integral Sensor in Canopy
|
Canopy with integrated Lutron Athena sensor
|
|
Canopy with integrated Legrand Wattstopper sensor
|
|
Canopy with integrated Enlighted Micro sensor
|
17.
Finish
Specify finish. Non-standard finishes available; select "Other (please specify)" and enter your specific requirements.
White Rail, White Cable, White Canopy/White Integral Power
18.
Options
If options are available with your selected rail, select all desired options. Select "None" if no options are required. If you don't see your ideal solution, select "Other (please specify)" and enter your specific requirements.
9’ 18/3 cord and plug allows the luminaire to be plugged into any standard grounded outlet.
On/off switch is only available with Table Arm. One on/off switch is provided per LED Driver.
Lighting controls sensors embedded within each fixture for individual luminaire control.
